Induction heating machines from Hitech Induction are built for continuous industrial duty in Gurugram. We manufacture IGBT-based systems for heating, billet heating, hardening, brazing, forging and annealing — from 5 kW portable units to 500 kW production lines. Use the links below to jump to a machine type.
Induction Heating · Billet Heaters · Hardening · Brazing · Forging · Annealing
Induction Heating Machines
Solid-state IGBT inverters for surface heating, shrink fitting, preheating, tempering and general process heat. Medium and high frequency with digital control and water-cooled transformers. Built for 100% duty cycle.
- Power range: 5 kW – 500 kW
- Frequency: 1 kHz – 400 kHz
- 100% continuous duty cycle
- PLC / HMI and recipe storage options
- Custom coil design included · 1 year warranty
| POWER 5–500 kW | FREQUENCY 1–400 kHz |
| VOLTAGE 415 V / 3-phase | COOLING Water cooled |
Inquire on this machine
Billet Heaters
Fast, uniform heating of billets and bars for forging presses and hammers. Precise temperature control reduces scale and energy cost versus gas furnaces.
- Round, square and rectangular billets
- Temperature uniformity typically ±10 °C
- Auto feed, orient and reject options
- Inline or offline configurations
| POWER 50–500 kW | FREQUENCY 1–10 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Hardening Machines
Vertical and horizontal scanners, single-shot and progressive hardening. Case depth controlled to a tenth of a millimeter for shafts, gears, pins and tools.
- Mechanical / CNC scanners
- Multi-frequency capability
- Integrated quench systems
- Recipe storage and process monitoring
| POWER 25–300 kW | FREQUENCY 10–400 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Brazing Machines
Clean, localized brazing of copper, brass, stainless steel and carbide tips for tools, heat exchangers and electrical contacts.
- Handheld and fixed stations
- Silver, brass and copper alloys
- Low oxidation, minimal cleaning
- Repeatable joint quality
| POWER 5–50 kW | FREQUENCY 50–400 kHz |
| VOLTAGE 230 / 415 V | COOLING Water cooled / air |
Inquire on this machine
Forging & Forming Heaters
High-power systems for hot forging, upsetting and warm forming. Rapid heat-up reduces cycle time and improves die life.
- High kW continuous operation
- Bar-end and full-bar heating
- Integrated temperature measurement
- Safety interlocks
| POWER 50–500 kW | FREQUENCY 1–10 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Annealing Machines
Pipe and wire annealing lines that run a controlled heat zone along the product. Restore ductility after drawing or welding without a batch furnace.
- Local or full-length annealing
- Tube and pipe line configurations
- Controlled cooling options
- In-line process capability
| POWER 15–150 kW | FREQUENCY 10–100 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Induction Hardening Machine Scanner
Scanning induction hardening for shafts, rods and pins. The part moves through the coil at a controlled speed so case depth stays uniform along its length.
- Scanner hardening of shafts, rods and pins
- Case depth set through power, frequency and scan speed
- Coil matched to your part diameter
- Job holding and rotation fixtures available
| POWER 25–300 kW | FREQUENCY 10–400 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Induction Shrink Fitting Machine
Heat gears, bearings, rings and motor housings quickly and cleanly so they expand for assembly, then shrink tight as they cool. No open flame or oven needed.
- Gears, bearings, rings and motor housings
- Fast, localized heating without open flame
- Repeatable temperature control
- Coils made to your part size
| POWER As per part size | FREQUENCY As per part size |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Induction Tempering Machine
Temper hardened components straight after induction hardening, with controlled temperature and time. Suits in-line operation with hardening machines.
- Post-hardening tempering of shafts and pins
- Controlled temperature and time
- Can run in-line after hardening
- Coil matched to your part
| POWER As per job | FREQUENCY As per job |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Tempering Oven
Oven tempering for batch loads of hardened components, where in-line induction tempering is not required.
- Batch tempering of hardened components
- Controlled temperature and soak time
- Loads sized to your production batch
- Complements induction hardening lines
| CAPACITY As per batch size | TEMPERATURE As per process |
| VOLTAGE As per model | APPLICATION Batch tempering |
Inquire on this machine
PLC Based Vertical Scanner
Vertical scanning fixture with PLC control for hardening shafts, rods and pins. A programmable scan cycle gives repeatable results part after part.
- PLC controlled scan cycle
- Vertical scanning of shafts, rods and pins
- Repeatable hardening results
- Works with induction hardening power supplies
| CONTROL PLC based | SCAN AXIS Vertical |
| PART TYPES Shafts, rods and pins | POWER SUPPLY Matched to hardening machine |
Inquire on this machine
Bolt Head Forging Induction Heating Machine
Induction heating of bolt and fastener blanks ahead of head forging. Only the end that is formed is heated, which saves energy and reduces scale.
- Heats the bolt head end ahead of forging
- Feed arrangements to suit your press
- Rapid, repeatable heating cycle
- Less scale than furnace heating
| POWER As per bolt size | FREQUENCY As per bolt size |
| VOLTAGE 415 V | COOLING Water cooled |
Inquire on this machine
Induction Cooling System
Closed-loop water cooling for induction power supplies, transformers and coils, sized to the kW rating of your machine so it can run continuously at full duty.
- Cooling for power supply, transformer and coil
- Sized to the machine power rating
- Suits continuous duty
- Advice on flow and water quality
| PURPOSE Cooling of power supply and coils | MEDIUM Water |
| CAPACITY As per machine rating | SUPPLY With or separate from the machine |
Inquire on this machine
Job Handling Fixture
Fixtures that hold, center, rotate or move your job through the coil, built to your drawing for repeatable positioning.
- Made to your part drawing
- Holding, rotation and positioning options
- Repeatable coil-to-part gap
- Fits hardening, brazing and heating machines
| PURPOSE Holding and positioning the job | CUSTOMISATION Made to your drawing |
| COMPATIBILITY Hardening, brazing and heating machines | MATERIAL As per job |
Inquire on this machine
Induction Hardening Machine Scanner
Scanning induction hardening for shafts, rods and pins. The part moves through the coil at a controlled speed so case depth stays uniform along its length.
- Scanner hardening of shafts, rods and pins
- Case depth set through power, frequency and scan speed
- Coil matched to your part diameter
- Job holding and rotation fixtures available
| POWER 25–300 kW | FREQUENCY 10–400 kHz |
| VOLTAGE 415 V | COOLING Water cooled |
Induction Shrink Fitting Machine
Heat gears, bearings, rings and motor housings quickly and cleanly so they expand for assembly, then shrink tight as they cool. No open flame or oven needed.
- Gears, bearings, rings and motor housings
- Fast, localised heating without open flame
- Repeatable temperature control
- Coils made to your part size
| POWER As per part size | FREQUENCY As per part size |
| VOLTAGE 415 V | COOLING Water cooled |
Induction Tempering Machine
Temper hardened components straight after induction hardening, with controlled temperature and time. Suits in-line operation with hardening machines.
- Post-hardening tempering of shafts and pins
- Controlled temperature and time
- Can run in-line after hardening
- Coil matched to your part
| POWER As per job | FREQUENCY As per job |
| VOLTAGE 415 V | COOLING Water cooled |
Tempering Oven
Oven tempering for batch loads of hardened components, where in-line induction tempering is not required.
- Batch tempering of hardened components
- Controlled temperature and soak time
- Loads sized to your production batch
- Complements induction hardening lines
| CAPACITY As per batch size | TEMPERATURE As per process |
| VOLTAGE As per model | APPLICATION Batch tempering |
PLC Based Vertical Scanner
Vertical scanning fixture with PLC control for hardening shafts, rods and pins. A programmable scan cycle gives repeatable results part after part.
- PLC controlled scan cycle
- Vertical scanning of shafts, rods and pins
- Repeatable hardening results
- Works with induction hardening power supplies
| CONTROL PLC based | SCAN AXIS Vertical |
| PART TYPES Shafts, rods and pins | POWER SUPPLY Matched to hardening machine |
Bolt Head Forging Induction Heating Machine
Induction heating of bolt and fastener blanks ahead of head forging. Only the end that is formed is heated, which saves energy and reduces scale.
- Heats the bolt head end ahead of forging
- Feed arrangements to suit your press
- Rapid, repeatable heating cycle
- Less scale than furnace heating
| POWER As per bolt size | FREQUENCY As per bolt size |
| VOLTAGE 415 V | COOLING Water cooled |
Induction Cooling System
Closed-loop water cooling for induction power supplies, transformers and coils, sized to the kW rating of your machine so it can run continuously at full duty.
- Cooling for power supply, transformer and coil
- Sized to the machine power rating
- Suits continuous duty
- Advice on flow and water quality
| PURPOSE Cooling of power supply and coils | MEDIUM Water |
| CAPACITY As per machine rating | SUPPLY With or separate from the machine |
Job Handling Fixture
Fixtures that hold, centre, rotate or move your job through the coil, built to your drawing for repeatable positioning.
- Made to your part drawing
- Holding, rotation and positioning options
- Repeatable coil-to-part gap
- Fits hardening, brazing and heating machines
| PURPOSE Holding and positioning the job | CUSTOMISATION Made to your drawing |
| COMPATIBILITY Hardening, brazing and heating machines | MATERIAL As per job |
Request a detailed quote
Share your part drawing and production rate. We will propose power, frequency, coil design and mechanical handling with clear delivery and 1 year warranty terms.
Contact us for a quote · Call +91 92788 50575 · WhatsApp available